■PD810-B5-L系列-测试电力参数方法
        多功能电力仪表用于配电系统的连续监视与控制。可测量双回路三相电流、功率、电能和需量，以及一路母线三相电压。具备4路数字量输入（DI），1路24V直流辅助电源输出。所有数据都可以通过RS485通信口用Modbus®-RTU协议读出。双回路多功能表将测量、智能化多功能和简单人机界面结合在一起。多功能电力仪表，节省盘面空间，占用通信资源少，降低配电监控系统和能源管理系统的造价，用户在实现配电自动化和能源管理的同时节省大量投资。

PD810-B5-L系列-测试电力参数方法

A programmable measurement, disy, digital communication and energy pulse transmission output , can complete electricity measurement, energy measurement, data disy, acquisition and transmission, extensive Application of substation automation, distribution automation, intelligent buildings, energy measurement, management, and assessment within the enterprise. The measurement accuracy is 0.5 grade, there is LED field disy and remote RS-485 digital interface communication, and MODBUS-RTU protocol is used.  Suitable for power distribution cabinets and intelligent buildings. Measuring power can accurately measure all commonly used power parameters in three-phase power grid systems: three-phase voltage, three-phase current, active power, reactive power, power factor, grid frequency, active energy, reactive energy, and with Communication interface and energy pulse output function. Adopt MODBUS-RTU communication protocol to realize LED field disy and remote RS-485 digital communication. It has the characteristics of convenient installation, simple wiring, convenient maintenance, small engineering volume, field programmable setting of input parameters, etc., and can complete the networking communication with different PLCs and industrial control computers in the industry.

[Synchro Intelligent 舜高智能]

■ 功能特点
        PD810-B5-L多功能电力网络仪表可以实时测量下列电气参数：
　　■ 电压V：三相相电压、线电压
　　■ 电流I：三相线电流及其平均、中线电流
　　■ 有功功率P：各相有功功率和有功功率
　　■ 无功功率Q：各相无功功率和无功功率
　　■ 视在功率S：各相视在功率和视在功率
　　■ 功率因数PF：各相功率因数和系统功率因数
　　■ 频率F：系统的频率


Alle elektrischen Parameter messen
Überwachen und steuern Sie den Netzschalter
Messung der aktiven und reaktiven Energie mit vier Quadranten
Mehrparameter-Übergrenzalarm
Verschiedene Formgrößen: 96 × 96, 120 × 120, können für verschiedene Schaltschränke verwendet werden
Kann direkt von Strom- und Spannungswandlern eingegeben werden, und PT / CT-Änderungen können beliebig eingestellt werden
LCD / LED-Anzeige, intuitives Anzeigebild
Kann an SCADA- und SPS-Systeme angeschlossen werden
Bequeme Installation, kleines Engineering-Volumen